Ir a contenido
Precios en pesos colombianos $COP
Precios en pesos colombianos $COP

MuxLab HDMI over IP Encoder with PoE

por BH
Precio original $1.801.000 - Precio original $1.801.000
Precio original
$1.801.000 - $1.801.000
Precio actual $1.801.000

MuxLab HDMI over IP Encoder Specs

Environment HDMI 1.3a, Ethernet, IGMP
Bandwidth 225 MHz
Compression MJPEG
Bit Rate 60 Mbps
Latency 1 frame; 33 ms latency at 30 fps
Network Requirements Point to Point: 100BaseT, Multipoint: 1000BaseT
IR Frequency 38 KHz
Configuration Options Point-to-point, point-to-multipoint, multipoint-to-multipoint (for multipoint-to-multipoint the gigabit Ethernet switch must support the IGMP communications protocol)
Connectors 1x HDMI
1x RJ45S for CAT5e/6 unshielded or shielded twisted pair via 10/100BaseT
1x 3.5 mm jack for IR emitter/sensor
DIP Switch 4-digit/position DIP switch for device ID addressing
Transmission Distance Based on a maximum length of 6.6 ft (2 m) of HDMI cable per end:

CAT5e/6: 328 ft (100 m) up to 1080p (Gigabit Ethernet required for 1080p)

When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used.
RJ45 Pin Configuration Reverse polarity sensitive; use EIA/TIA 568A or 586B straight-through wiring:

Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
Required Cabling 1x CAT5e/6 or better twisted pair
Power Supply 110-240 V / 5 VDC power supply with North American blades included
Power Consumption 2.9 W
Operating Temperature 32 to 104°C (0 to 40°C)
Storage Temperature -4 to 185°C (-20 to 85°C)
Humidity Up to 95%, non-condensing
Enclosure Metal
Compliance Regulatory: FCC, CE, RoHS; Flammability: 94V0
Dimensions 3.7 x 3.7 x 1" (9.4 x 9.4 x 2.5 cm)
Weight 1.1 lb (0.5 kg)
Packaging Info
Package Weight 1.09 lb
Box Dimensions (LxWxH) 8.2 x 6.05 x 2.2"